Sta-Rite 5P6R Swimming Pool Pump – Single Phase
The LA Sta-Rite HD – 5P6R series pumps are designed for the higher volume semi-commercial or commercial installation.
Sta-Rite highly recommended the installation post pump of the serviceable check valve to inhibit impellor spin-off due to back pressures.
The pump can suction lift up to 4.5m and has 2″ BSP Threaded intake & discharge for higher pumping volumes.
We have also included in the list an engineers secret tool called ‘Magic Lube’, this is a highly viscous long term silicone lubricant which is perfect for sealing the O-rings on unions, simply smear onto your o rings for a perfect seal. Can also be used on pump basket O-rings or filter lid O-rings.
Heavy Duty Motor50 Hz motors are designed for continuous, quiet operation – feature stainless steel one piece shaft, sealed and permanently lubricated bearings – runs cooler for prolonged life under high ambient conditions
Self-priming diffuserSelf Priming Diffuser design makes this our fastest priming pool pump… incomparable!
“See Thru” trap lidEliminates all the guesswork – you see when the basket needs cleaning – designed to withstand 4 bar test pressure as well as high vacuum conditions. New Quick-Lock trap cover ring permits fast access to the strainer basket.
Exclusive “lock-in” 5″ Diameter basket prevents large debris from clogging the impeller.
|Pump Power Conversions|
|0.25 Kw||0.33 HP|
|0.375 Kw||0.5 HP|
|0.55 Kw||0.75 HP|
|0.75 Kw||1.0 HP|
|1.12 Kw||1.5 HP|
|1.5 Kw||2.0 HP|
|2.25 Kw||3.0 HP|
Please note that most domestic pumps are Single Phase 240v pumps. Three Phase 415V pumps are very uncommon in a domestic environment. If you are unsure, you must check with your qualified Electrician who can advise you on your requirements.
The Pump is configured with 1 1/2″ female parallel threads for both the horizontal intake and the vertical discharge.
We recommend you use P.T.F.E tape or LA-CO Slic-Tite to apply to the male thread on your pump unions. please order your unions if required from the pipework section. The 1 1/2″ male threaded unions are ideal if you are connecting your remaining pipework with normal solvent weld fittings.
We also recommend the use of the Anti-vibration pad, as this allows the pump to be installed onto various floor surfaces with the added sound & vibration deadening benefit the pads give.