Description
Aquacheck TruTest Spa Refill Pack
The Aquacheck TruTest Spa Refill Pack – 50 test strips in each pack
Tests for Bromine, pH and Total Alkalinity Test Strips x 50.
The Aquacheck TruTest Spa Digital Test Strip Reader is for spa owners using bromine, the red TruTest Spa meter provides an easy and clear digital readout. Simply dip a test strip, place on the test strip reader, and your results will be displayed. Refills available.
In general, results are comparable to other visual testing methods obtained by a person with good color matching ability. When the water sample being tested is near or outside of the range of results boundaries, results may not reflect actual water conditions, chemistry problems or questionable results occur.
To keep your pool at its best, test at each end a minimum of twice a week, and test your spa before each use. Its also a good idea to write down your results each time you test.
Comes with complete instructions.
pH – in the range of 6.2 – 8.4, ideal range between 7.2 – 7.6
Bromine – in the range of 0 – 20, ideal range between 3 – 5ppm
Total Alkalinity – in the range of 0 – 240 ppm – ideal range between 80 – 120 for pools.
TA is defined as dissolved solids such as lime stone, calcium etc keeping your TA lower will reduce the build up of lime scale on the surfaces of the pool & associated filtration equipment, especially direct fired gas boiler heat exchangers or electric element heaters such as Elecro heaters or Thermalec heaters. If you are not sure if you are in a high TA area, simply inspect the inside of your kettle to see if there is a large build up of scale.
Application Instructions:
1. Press Power ON
Turn Unit ON by pressing power button. Display will read ‘On”
2. Press start button and dip a strip at the same time.
Remove test strip immediately and shake excess water from strip with a simple flick of the wrist.
3. Place tip of strip in back end of channel, lay flat, pad side down.
DO NOT SLIDE THE TEST STRIP ACROSS THE GLASS
4. Now Wait for Results. (Do Not Hold onto Strip)
Digital Results for Bromine, pH, and Total Alkalinity will appear together in seconds.
Check the status of your results for each parameter.
The status LO=Low, OK=Ideal,
HI= High is displayed to the left of each digital value.
Important: Keep cap on tight between uses.
Store at room temperature.