Thermalec Electric Heaters

Unlike conventional pool heaters, the Thermalec is guaranteed to hold its thermal efficiency for life, without regular cleaning or de-scaling. This means your running cost will not increase with time and maintenance costs are drastically reduced

£1,089.00 inc VAT

Product reference: 277 Category:

Description

Thermalec Electric Heaters
The best way to heat your pool
Unlike conventional pool heaters, the Thermalec is guaranteed to hold its thermal efficiency for life, without regular cleaning or de-scaling. This means your running cost will not increase with time and maintenance costs are drastically reduced.
No need for expensive compulsory annual inspection required by fired boilers. Using low cost electricity such as Economy 7 ensures not only one of the lowest cost methods of heating your pool, but because the filter pump runs on the same low tariff for the same period as the heater, filtration costs can be cut by as much as two thirds. If you need a heater, you need a Thermalec. No constant noise, no fumes, no flames, no emissions, no fans, no fuss… just perfect water conditions and maximum enjoyment.
The safety thermostat measures the temperature of the water as it leaves the heater, providing perfect safety for bathers. A temperature rise within the heater, due to poor water flow conditions, is rapidly sensed by both the control and safety thermostat.
The unique cup-shaped base design ensures that the heated part of the element is always kept beneath the water, even if the flow from the pump fails. Flow failure simply allows the water in the cup to heat up and switch the heater off instantly using the normal temperature controls. All heaters 15kW and above have circuit breakers as well as the working contactor, which are switched off by excess temperature.
Some sizes of heater are only available in either single phase (1~) or three Phase (3~) which we have highlighted in the selectable size option list.
Specifications:
HEATER BODY: Cast in BS-EN-1561-1997-ENGJL-200 iron, with a heavy fusion bonded epoxy coating impervious to chemically treated pool water, constructed in accordance with British Patent 2.092,282 Design pressure of 35psi (2.46kg/cm2) with 3/4″ safety valve(s) set to operate at the maximum normal working pressure of 30psi (2.1kg/cm2) giving protection to both the heater and and the installation as a whole against over pressure. A 1/2″ drain valve at the lowest point allows the heater to be left empty in winter. Flow connections consist of easily removable UPVC stub flanges into which the pipes may be fitted using suitable adhesive, as the flanges can be released easily from the heater no unions are required, nor is any form of heat sink needed. Flow direction is from left to right, but may be reversed quite simply on site following the installation instructions.
HEATER ELEMENTS:
Heavy duty incoloy sheathed elements to BS-EN-60335-1, with low Watt density for long life, are mounted individually in a removable top plate, which allows complete inspection of the interior of the vessel.
CONTROLS:
Heavy duty contactors control the power supply to the elements. The contactors are switched in turn by a filter pump interlock relay, a pool temperature controller with less than 1°C differential, and a manual reset safety thermostat to operate before the temperature reaches 53°C. The control circuit is protected by a 2A fuse. A minimum of 6 indicator lights monitor every stage for simple diagnostic servicing. The controls are mounted in a plastic coated steel enclosure above the heater body. Cable entry is through a removable plate in the rear panel.

Warranty & Returns

Warranty
This Product has a 1 year warranty.

Returns
Should you require any further information, please email info@ukpoolstore.co.uk where we will respond to your request quickly.

Stock & Delivery

Stock
This product is in stock at our warehouse and is ready for Express or Economy Delivery Service.

Delivery – Mainland UK
Orders placed before 2pm Monday to Friday we aim to dispatch on the same day, after 2pm will be the following working day. This does not include Bank Holidays, which are classed as non-working days. Should you require a Saturday delivery or have any other delivery enquiries, please email dispatch@ukpoolstore.co.uk who will respond to your request quickly.

Try to include your mobile phone number in the checkout area so that our delivery drivers can contact you should they need any further assistance or clarification in delivering your order.

Please ensure you leave detailed information if your delivery address is hard to find or a new housing development. If you know there is a possibility of missing the delivery, you can at the checkout stage leave instructions for the delivery driver to leave without signature and place your goods with a neighbour or in a discreet place out of sight for your later retrieval.

Please note some areas including Scotland(post codes AB, FK, IV, KW, PA, PH, HS, KA, ZE, TR, DD, PH, PA, KY, AB, DD, KW, IV, HS), Isle of Wight, Isle of Man, will need extra carriage. We no longer ship to Jersey, Guernsey or Northern Ireland.

PLEASE CHECK YOUR DELIVERY

If you are unable to thoroughly check your delivery upon receipt, sign for it as UNCHECKED. If the package is damaged in any way, no matter how small, please sign for it as DAMAGED. We CANNOT CLAIM from our carriers for any damaged items that have not been signed for as UNCHECKED or DAMAGED.

If you sign for a delivery as OK, which you later find to be damaged, our carriers WILL NOT accept liability and you may be charged for the damaged items, in this case a delivery charge for replacement items WILL be made.